| [Thermal protector] | 熱保護器 |
RS9700(Small Size)
The rated electric properties: AC 250V
The maximum working current: 5A (resistive load)
Operating temperature: 65-150 degrees C (special requirements can be settled through negotiation)
Action: deviation of plus or minus 5 degrees C
The contact life: not less than 6000 times (resistive load)
Contact resistance: not greater than 100m.
Dielectric strength: AC 50HZ 1500V for 1min without the phenomenon of breakdown flashover
Insulation resistance: more than 100m omega (DC megohmmeter of 500V)
Product description:
The characteristics of:
The temperature controller is a rectangular small structure, its working temperature is fixed,the action quickly, reliably, simply, no arcing, long service life. Because of the small volume,can be installed in small parts or embedded in the product
The temperature resistance, up to 150 degrees C.
The working principle of:
Using double metal sheet as a temperature sensing element, deformation principle under the different temperature, the contact moves quickly, achieve the purpose of open circuit.
The scope of application:
This product is specially designed for motor temperature control and overheat protection work,but also can be used for household appliances, suitable for all kinds of motor, vacuum cleaner, electric tools and a variety of household electric products.
Orders and instructions for use:
The user must be according to the characteristics of their products, accurate determination ofthe actual temperature thermostat and a fuse body parts in thermal stability after, and through the matching test to determine the temperature controller and the temperature fuse action,and then put forward the action ordering temperature value.
When ordering, the user must specify the set temperature controller and a fuse body type,and specify the installation hole dimensions and terminal temperature controller size and shape.
The special requirements of users put forward in a really need, including the temperature andshape, the factory can be resolved through consultation.
When in use, the temperature controller and the fuse of whole sealing type should as far as possible so that the metal shell is immediately accused product installation position. The installation can not be the metal casing collapse or deform. In order to avoid operating temperature variation or affect other properties. Manual reset operation manual reset type temperature controller must be below the nominal operating temperature of 15 degrees, the implementation should be less than 30N, so as not to damage the reset mechanism.